| Process and Wastewater Services |
|
 |
|
Pilot Testing |
|
 |
|
K2O Consulting
offers on site pilot testing of the DMI-65 Media. An
8” column with feed pump, backwash pump and sodium
hypochlorite dosing system are included with the
test unit. Influent and effluent samples are taken
and sent to a laboratory for metals analysis.
Results can be reported down to 1 PPB (part per
billion) if required. The results are tabulated and
recommendations are made in a final report to the
customer |
|
 |
|
|
|
SDI (Silt Density
Index) Testing |
|
|
|
K2O Consulting offers on site SDI testing of water to be used for
boiler feed water systems. SDI testing is very
important when designing a boiler feed water system
so that the proper pre-treatment can be determined
in order to prevent more frequent membrane cleanings
and fouling of Reverse Osmosis (RO) membranes. A
report is provided to the customer with the SDI
readings observed along with pre-treatment
recommendations. |
|
|
|
|
|
|
Water Analysis |
|
|
|
K2O Consulting can
provide balanced process water analysis and
wastewater analysis. |
|
|
|
|
|
Review of Existing
Equipment |
|
|
|
K2O Consulting can
review existing equipment and systems to determine
their useful life and ability to meet discharge
requirements. Recommendations can be made as to
whether or not existing equipment can be upgraded or
if new more cost effective and efficient equipment
should be implemented. |
|
|
|
|
|
|
Process Design and
Equipment Selection For: |
|
|
|
- Boiler Feed Water Systems
- Oil/Water Separation by Gravity
or walnut shell filtration
- River Water Filtration
- Clarification
- Dewatering
- Filtration
- Metals Removal
- Recycle/Reuse
- Biological Treatment
|
|
|
|
|
